SmartFan® XR Kappe

 

SmartFan X series

No more humidity, no more smells

 

Contact

Image Wave

getAir® exhaust air systems

X-Series


getAir’s X-series bathroom and kitchen fan systems can be simply installed in a wall or ceiling, providing optimal dehumidification without using lots of energy, and removing smells and smoke.
The SmartFan X with automatic humidity control is ideally suited for transporting humidity to the outside via an outside wall. The “SmartFan X9” offers a wide range of functions and runs very quietly.
The “SmartFan XR” is again ideally suited for discretely removing unpleasant smells and humidity from wet rooms with no outside wall. In combination with ALD air vents, the unit constitutes a low-cost form of controlled home ventilation.

SmartFan XR

Efficient ventilation for bathrooms and kitchens


Designblende
SmartFan XR

Unpleasant smells and humidity can be discretely extracted from all wet rooms (e.g. kitchens and bathrooms) without an outside wall (in accordance with DIN 18017). An integrated non-return damper prevents any smells or smoke being transferred, and the system is suitable for all wet-room protection categories (1-3). The high-efficiency radial system uses just 24.4 watts at maximum airflow speed of 100 m³/h.

The SmartFan XR is an all-rounder, offering flexible control and application possibilities. Dependent on which module is used, the system offers overrun, humidity and/or sequence controls. Dependent on which flush-mounted casing is used, a wide range of functions are available, including fire protection or connecting up a second room. The getAir ventilation can be installed virtually anywhere, whether in the wall or the ceiling.

 

For more informationn Show technical data


Controlled home ventilation in combination with ALD air vents

With your SmartFan XR running all the time in combination with ALD air vents, you can keep a room constantly ventilated. The use of such a combination constitutes a simple and low-cost form of controlled home ventilation (in accordance with DIN 1946-6 and DIN 18017-3). 

Contact us for advice

 

SmartFan X9

Multifunctional, quiet and efficient


For all wet rooms with high functional and design requirements. The SmartFan X9 can run in nine different operating modes, offering a whole range of possibilities specifically for wet rooms. All conceivable ventilation scenarios can be served, from automatic humidity control to timer-controlled operations. Moreover, the system has its own built-in infrared motion detector.

The SmartFan X9 is one of the quietest and most efficient bathroom fans in its class. Operating at an airflow volume of 110 m³/h, it has a sound pressure level of just 25 dB and requires on average just 3 watts of power.

For more information Technical data


X9 - Technologie

 

 

Operating modes for non-stop ventilation

1

Fully automatic - three speeds
Base airflow volume 40m3/h
Motion detector volume 60m3/h
Humidity sensor volume 95m3/h

2

In detection of higher humidity levels or unpleasant smells
Base airflow volume 40m3/h
Motion detector volume 60m3/h
Humidity sensor volume 110m3/h

3

Without activated motion detector
Base airflow volume 40m3/h
Motion detector volume 95m3/h

Operating modes for occasional ventilation

4

Automatic start-up via humidity sensor / motion detector
Motion detector volume 60m3/h
Humidity sensor volume 95m3/h

5

Manual start/stop via switch
Base airflow volume 95m3/h

6

Holiday mode
Motion detector volume 60m3/h
Humidity sensor volume 95m3/h
On detection of an inactive humidity sensor / motion detector > 24h, 60m3/h every 12 hours for 30min

Operating modes for occasional ventilation

7

Save energy
Transfer warmth from well-heated rooms (e,g, with a wood burner) to neighbouring rooms.

Further operating modes

8

Activated, but without motion detector
Base airflow volume 60m3/h
Humidity sensor volume 95m3/h

9

Automatic start via humidity sensor
Humidity sensor volume 95m3/h

0

Off
The unit is turned off

SmartFan X

Sleek and compact for wet rooms with outside walls


The SmartFan X is suitable for transferring moisture over the outer wall. Easy and quick to install with a 100 mm pipe.

The extractor fans are characterised by their sleek design and the patented iris diaphragm. The SmartFan X has an elegant design and can be installed in even the smallest rooms.
Via its integrated humidity sensor, you can control the desired humidity level (40 - 90%) of the air in your bathroom as required. Moreover, you can set the fan's overrun time to 2-45 mins via a timer. The fan can be turned on and off via the room's light switch or any other external switch.

For more information Technical data

 


Timer and humidity module

Timer
Adjustable overrun time (2 - 45 mins, pre-set at 20 mins); On/off via an external switch (e.g. a light switch).

Humidity
Relative humidity level adjustable from 40 - 90%, overrun time 2-45 mins. (the module is pre-set at 60%).

 

Newsletter
getAir Loading
keyboard_arrow_up